Peat Inlet well #3 depth in summer 2011

Abstract: 

Data on sensor depth gathered from PIn Well 3 in 2011 from the CSASN-1 project. A HOBO U23 water level logger was used. This data is used to understand frost table changes throughout the season.

Project Keywords: 

Data set ID: 

10452

EML revision ID: 

4
Published on EDI/LTER Data Portal

Citation: 

Gooseff, M. 2013. Peat Inlet well #3 depth in summer 2011 Environmental Data Initiative. http://dx.doi.org/10.6073/pasta/f0c513552d45b605b9049df9d0ce4dda
People
Dates

Date Range: 

Tuesday, June 16, 2015 to Sunday, September 13, 2015

Publication Date: 

2013

Methods: 

These files contain water depth data from wells located along the banks of Peat Inlet stream. Wells were installed in 2010 by hand to a depth of refusal at the frost table boundary, therefore they were installed to monitor active layer shallow groundwater dynamics. HOBO U23 level loggers collected data at sub-hourly intervals at the bottom of each well. We made out best efforts to lower the loggers as the frost table lowered, such that we were always measuring pressure (i.e. water level) from the active layer / frost table boundary. Raw pressure data was converted to water level using the barometric assistant tool in HOBOware Pro software. Barometric data was collected at the outlet of I8 Lake.

Version Changes: 

No more updates. Project completed in 2012.
Organized and Prepared by A. Wlostowski: Apr. 2013
Version 2: File path reset, key words updated (JD.Dec2013)
Version 3: Checked keywords against the LTER network preferred list and replaced non-preferred terms. Jim L 15Jan14

Sites sampled.

Full Metadata and data files (either comma delimited (csv) or Excel) - Environmental Data Initiative repository.

Use of the data requires acceptance of the data use policy --> Arctic LTER Data Use Policy